Hebei Jinguang Packing Machine CO.,LTD
Hebei Jinguang Packing Machine CO.,LTD
Add to Cart
Cockroaches glue trap machine Pest Control glue coating cockroach killing trap making machinery
1.Rat Glue Trap Board Fly Killer Insect Glue Traps Machine brief introduction
The automatic release paper machine produced by our company is a special equipment for producing sheet glue and automatic laminating release paper.This equipment can produce cockroach boards, insect sticky boards, cardboard sticky rat boards and other products that need to be glued and coated with release paper.
2. Machine working principle
The sheet is sent out by a single piece of paper feeder , through coating glue gun coating ,After the automatic cooling forward,Arrive at the sticker release paper wheel.When the bonding part detects the cardboard, the release paper pressing wheel presses out the release paper of the required length, the cutter wheel cuts off the release paper, and at the same time, the release paper and the cardboard are covered. The finished product is delivered through the conveyor belt.
3.Operational aspects
1) the melt tank can not be used without glue.
2)The glue of the melt tank must be fully opened to start.
3)The air pressure must reach the set value to start
4)When you wipe the glue, stop it and confirm the safety before operating.
5)Do not idle for a long time.
6)Power off for long periods of downtime.
4.Different size for insect fly rat glue traps machine
| Size | bottom paper width | release paper width | glue coating width |
| 300mm | 250mm | 250mm | 230mm |
| 500mm | 450mm | 450mm | 430mm |
| 600mm | 550mm | 550mm | 530mm |
5. Insect glue trap sample picures and machine picture
