
Add to Cart
Pest Control Equipment Automatic High Speed Yellow Insect Trap Paper Machinery
I. Overview
The sticky insect board machine manufactured by our company is a special equipment for producing sticky insect board. Glue compounding, slitting, punching, and counting can be done all at once on this equipment. This equipment is easy and convenient to operate, it is a high-speed, efficient and stable equipment.
2. Working principle
One roll of base material and two rolls of release paper are respectively installed on the material roll of the machine, pass through the transition wheel of the machine in turn, and the main drive rubber wheel reaches the cutter. Two sets of reverse-drawing glue guns apply glue on the release paper or the silicone oil surface of the release film at the same time, and at the same time fit the substrate, the cutter will cut it into single sheets according to the set length, and then punch through the punching device Finish the finished product.
1.PT100 temperature meter :2pc
2..40A 80Asolid stae relay :each 3pcs
3.fuse seat :4pcs 4 Plug insert : 2sets
5.PT100 Temperature control:5pcs 6..return valve:1pcs
7.filter for gun and glue tank : each 1pcs 8.Hose elbow connect ::8个
9.seal ring , PTFE pad :some 10.Gear pump and gear :1set
11..seal gum : 1 bottle ( after wash the gear pump , coating the gum to link part of gear pump with tank bottom , prevent link part to leak the glue ; after the coating it ,must seal the glue use the bottle cap .otherwise that will waste )