Hebei Jinguang Packing Machine CO.,LTD
Hebei Jinguang Packing Machine CO.,LTD
Add to Cart
PP Sheet Coil Yellow Sticky Insect Trap Board Making Pest Control Machine
1.FInish Products
2.Machine principle
Through the transition wheel of the machine in turn,Install one roll of substrate and two rolls of release paper on the material roll of the machine, let the the main drive rubber wheel reaches the cutter.
Two sets of glue guns apply glue on the release paper or silicone oil surface of the release film at the same time.
And the base material is laminated, and the cutter cuts it into single sheets according to the set length, and the finished product is punched through the punching device.
3.Technical Parameter
| Work speed | 20000 pcs / hour ( produce sheet , not include punch speed ) 10000 ocs / hour ( Produce include punch speed) 3000 m / hour ( produce rewind coil speed ) |
| Air pressure source | 5-7kgf/cm² |
| Total Power | 18.5 KW ( heat power 15KW ) |
| Equipment use power | AC380V |
| Main machine size | 3330*1150*1800 mm |
| Glue tank size | 1100 * 560 * 1050 mm |
| Counting extension size | 2000 * 985 * (700-950 mm ) ( Include work table size) |
| Rewind part size | 1100*1000*900 mm |